"Remove the strip cover" on page 45
Step 1.
Remove the hinge rubber carefully.
Figure 30. Remove the hinge rubber carefully
Go to
https://support.lenovo.com/partslookup
part:
Hinge rubber
Remove the LCD module
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 43
"Remove the strip cover" on page 45
Step 1.
Detach the LCD module connectors. Carefully pull out the pieces of adhesive tape with tweezers
and then remove two screws.
Figure 31. Remove the adhesive tape and remove two screws
46
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement