Philips S9031/12 Instructions Manual page 32

32
English
Problem
The shaver is not
entirely clean
after I clean it in
the SmartClean
system.
The shaver is
not fully charged
after I charge it in
the SmartClean
system.
Possible cause
You have not
placed the shaver
in the SmartClean
system properly, so
there is no electrical
connection
between the
SmartClean system
and the shaver.
The cleaning
cartridge needs to
be replaced.
You have used
another cleaning
fluid than the
original Philips
cleaning cartridge.
The drain of the
cleaning cartridge is
blocked.
You have not
placed the shaver
in the SmartClean
system properly, so
there is no electrical
connection
between the
SmartClean system
and the shaver.
Solution
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
Replace the cleaning
cartridge.
Only use the original Philips
cleaning cartridge.
Remove the cartridge from
the SmartClean system and
push the hairs down the
drain with a toothpick.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.