Troubleshooting - Hunter Lantern Bay Installation Manual

Fan Doesn't Work
• Make sure power switch is on.
• Push the motor reversing switch firmly left or right to ensure that it is
engaged.
• Check the circuit breaker to ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen the canopy and
check all the connections according to the wiring diagram.
• Check the plug connection in the switch housing.
Excessive Wobbling
• Make sure the blades are properly installed on the blade iron posts.
• Turn the power off, support the fan carefully, and check that the hanger
ball is properly seated.
• Use the provided balancing kit and instructions to balance the fan.
Remote Control of Fan is Erratic
• Make sure the battery is installed correctly.
• Install a fresh battery.
Hunter Pro Tip:
Cleaning the Fan
Use soft brushes or cloths to prevent scratching.
Cleaning products may damage the finishes.
Ceiling fans work in two directions: downdraft (counterclockwise rotation) and updraft (clockwise
rotation). To change the direction of air flow, turn the fan off and let it come to a complete stop.
The reversing switch is located inside the light fixture cage. It can only be accessed when the
cage is removed. Slide the reversing switch to the opposite position. Restart the fan.
Reverse
Switch

Troubleshooting

Remote Only Works Close to Fan
• Change battery.
Noisy Operation
• Make sure the blades are properly installed.
• Check to see if any of the blades are cracked. If so, replace all of the
blades.
Multiple Remote Issues
• If you have multiple remotes or multiple remote-controlled fans installed
on the same circuit breaker and you are experiencing interference or
faulty operation of your remote controls, please go to
www.HunterFan.com/FAQs and click
remote-controlled fans?"
Wireless Issues
• Reset the Wi-Fi module by removing the battery door. Press and hold
the reset button for 5 seconds. The fan and light LEDs will flash once
the module has been reset.
Reversing the Fan
"How do I properly install multiple
for information on how to correct this issue.
Updraft (clockwise rotation)
creates a more indirect airflow.
Updraft airflow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct
breeze and maximum cooling
effect.
1886
12