Draining The Recovery Water - RCm BIT 391CB/3 BIT 391C Use And Maintenance

EN
10.1 DRAINING THE
RECOVERY WATER
(Fig. 13)
At the end of the washing cycle or when the
recovery water tank (1) is full, it is necessary
to empty the tank by proceeding as follows:
N.B.:
To dispose of the recovery water, comply
with the standards in force in the country in
which the machine is used.
- Position the machine near to a drain out-
let.
- Disconnect the hose (2) from the support
(3).
- Remove the cap (4) from the hose (2)
and drain all the water contained in the
tank.
1
2
EN-18
3
2
2
4
1
Fig. 13