Lever For Handle Angle Regulatio - RCm BIT 391CB/3 BIT 391C Use And Maintenance

7.1 LEVER FOR HANDLE
REGULATION (Fig. 9)
- By pulling on the lever (1), it is possible to
vary the position of the handle (2);
releasing the lever, the handle is posi-
tioned and locks in the nearest required
position.
N.B.:
By positioning the handle (2) vertically, it is
possible to effect a more thorough cleaning
of corners by rotating the machine on itself.
8
ANGLE
2
1
Fig. 9
EN-13
EN