Installation; Water Inlet - Miele G 5006 Operating Instructions Manual

Table of Contents

Advertisement

Water inlet

Risk to health due to wash water.
Water in the dishwasher must not be
used as drinking water.
Do not drink any water from the dish-
washer.
Risk to health and risk of dam-
age due to contaminated incoming
water.
The quality of the incoming water
must correspond to the drinking wa-
ter specification of the country in
which the dishwasher is being oper-
ated.
Connect the dishwasher to a drinking
water supply.
The dishwasher may be connected to
cold or hot water (up to max.
140°F/60°C) supplies.
We recommend connecting to a cold
water supply to reduce energy con-
sumption.
If energy-saving water-heating sources,
such as solar energy circulation sys-
tems, are used, we recommend con-
necting to the hot water. This saves
both time and electrical energy costs.
Hot water is used in all programs.
The water inlet hose is approx.
5 ft/1.5 m long. The slightly transparent
corrugated hose around the water inlet
hose provides protection during trans-
portation and can be removed if neces-
sary. However, if desired the corrugated
hose can be left in place to provide ad-
ditional protection during daily use.

Installation

75

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 5008G5006scuG 5008 scu

Table of Contents