Table of Contents
Advertisement
Frequently asked questions
Fault messages
Problem
The display shows a
fault number that is not
listed below.
Fault :
The drain pump may
still be running, even
with the door open.
All of the program se-
lection indicator lights
are flashing.
Fault number ap-
pears in the time dis-
play.
64
Possible cause and solution
There may be a technical fault.
Turn the dishwasher off with the button.
Turn the dishwasher back on after a few seconds.
Restart the desired program.
If the indicator lights flash again, there is a technical
fault.
Turn off the dishwasher.
Turn off the water-supply faucet.
Contact Miele Customer Service.
The Waterproof system has reacted.
Turn off the dishwasher.
Turn off the water-supply faucet.
Contact Miele Customer Service.
Circulation-pump fault.
Turn off the dishwasher.
Turn the dishwasher back on.
Restart the desired program.
If the fault message appears again, there is a techni-
cal fault.
Turn off the dishwasher.
Turn off the water-supply faucet.
Contact Miele Customer Service.
Advertisement
Table of Contents
