Miele G 5006 Operating Instructions Manual page 58

Cleaning and care
Inserting the upper spray arm
 Reinstall the upper spray arm and
tighten it by hand.
Inserting the middle spray arm
 Replace the middle spray arm and
turn the screw thread counterclock-
wise until it engages. Make sure that
the recesses in the lock line up.
Inserting the lower spray arm
 Reinstall the lower spray arm and en-
sure that the filter combination lies
flat in the base of the wash cabinet.
58
 Rotate the screw thread of the lower
spray arm clockwise until the arrow in
the viewing window points to the lock
symbol .
 Make sure the spray arms can rotate
freely.

Damage due to soiling entering
the circulation system.
The lower spray arm is used to se-
cure the filter combination. Without
filters, coarse soiling can enter the
circulation system and cause a
blockage.
Do not run a wash program without
the lower spray arm or without the fil-
ters.
Inserting the cutlery tray (if present)
 Slide the cutlery tray back onto the
rails from the front.
 Replace the safety clips in the rails on
both sides of the cutlery tray.