HAMPTON BAY 594-817 Instruction Manual page 5

ASSEMBLY INSTRUCTIONS:
1. Begin assembly at the bottom of the lamp.
2. Insert lamp pole (B) into base (A) and turn clockwise to
tighten.
3. Insert lamp pole (C) into lamp pole (B) and turn
clockwise to tighten.
4. Repeat above step with poles D and E.
5. Insert the shade holder (F) into lamp pole (E) and turn
clockwise to tighten. You may need to pull any excess cord
gently through the poles so that these parts fit.
6. Unscrew the wing nut (H) from the screw (I), Place the
shade (G) onto shade holder (F) and matching the screw
(I), turn wing nut (H) onto screw (I) clockwise to tighten.
7. Unscrew the socket ring (L) counter-clockwise from the
socket (J).
8. Place the shade (K) to the socket (J) and turn the socket
ring (L) clockwise to tighten.
9. Install two 26W maximum type E26 Compact
Fluorescent bulbs (included N) on uplight (F) or use two
type A 150W maximum bulbs (not included). Install one
13W maximum type E26 CFL bulb (M included) in
reading light (J) or use one type A 60W maximum bulb
(not included).
Page 5