AEG RTB415E2AW User Manual page 9

4. Lift the top cover and place it on a soft
surface.
5. Unscrew the 4 screws that connect the
upper hinge. Put the upper hinge in a
safe place together with the screws.
6. Lift the door and put it on a soft surface.
7. Tilt the appliance carefully on a soft foam
packaging or similar material to avoid any
damage to the back of the appliance and
the floor.
8. Unscrew the screws of the bottom hinge
and adjustable feet.
9. Install the pin in the opposite hole of the
hinge.
10. Screw the bottom hinge on the other side
of the appliance.
11. Install the rubber support on the side with
no hinge.
12. Fit the door on the lower hinge making
sure the hinge pin enters the door bottom
hole.
13. Install the upper hinge on the opposite
side of the appliance. Fit the upper hinge
pin into the door upper hole. Tighten the
screws.
14. Screw the remaining 2 screws on the top
side of the appliance with no hinge.
15. Place the top cover on the appliance and
tighten the screws on the back.
Install the door equipment.
Wait at least 4 hours before connecting the
appliance to the power supply.
3.6 Installation of a door handle
If there is a door handle provided in a bag
separately, you can install it as follows:
1. Remove the screws from the holes on the
side of the door.
ENGLISH 9