Whirlpool W10757742A Use & Care Manual page 10

4.
Select type of load to dry
First select a cycle from the "What to Dry" and then select the
"How to Dry" to get the best combination cycle available for
the type of items you are going to dry. See "Cycle Guide" for
cycle details. Not all cycles are available on all models.
Automatic Cycles:
You can select a different dryness level, depending on your
load. Touch DRYNESS to scroll to Less to More. Selecting
Less to More automatically adjusts the dryness level at which
the dryer will shut off. Dryness level can be changed in the first
5-8 minutes of the cycle.
Automatic Cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
Quick Cycle:
Quick is a timed cycle designed to dry smaller loads. This
"How to Dry" choice does not use sensors, but dries for a set
amount of time, which is adjustable by touching Timed Dry
Adjust "+" or "–". The time will default to a shorter time for
Quick than for Timed Dry.
Timed Dry Cycle:
When you select Timed Dry, the default time appears in
the display. Touch "+" or "–" to increase or decrease the time
in 1 minute increments. Touch and hold to change the time
in 5 minute increments.
The default temperature may be changed by pressing
Temperature until the desired dry temperature is lit.
Steam Refresh Cycles:
Select Steam Refresh to reduce odors and light wrinkles in
dry loads consisting of wrinkle-free cotton, cotton-polyester
blends, common knits, and synthetics.
5.
Adjust cycle modifiers, if desired
You may adjust different settings,
depending on what you are drying and
how you are going to dry the item. See the
"Cycle Guide" for detailed information.
NOTE: Not all cycle modifiers are available
with all cycles.
10
6.
Select any additional options
Add additional options such as Static Reduce and/or Wrinkle
Shield™ by touching that option. If unable to remove the load
promptly, select the Wrinkle Shield™ option before pressing
START/PAUSE to add up to 150 minutes of periodic tumbling.
You may select the "+ Steam" setting to add a short steam
cycle after 60 minutes to help smooth out wrinkles.
NOTE: Not all options and settings are available with
all cycles.
7.
Touch and hold START/PAUSE
to begin cycle
Touch and hold START/PAUSE to begin the cycle.
"Control" is an indicator only. To lock the controls on the dryer,
touch and hold STEAM REFRESH for 3 seconds. To unlock
the controls on the dryer, touch and hold STEAM REFRESH
for 3 seconds.
8.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle has completed
to reduce wrinkling.