Operation; Using The Vacuum Cleaner; Using The Charging Stand - Samsung VS20R9046P3 User Manual

OPERATION

Using the vacuum cleaner

Using the charging stand

1
Release button
18 English
Charging
❇ Make sure the back of the battery is
correctly placed onto the vacuum charging
part.
❇ Check if the battery level indicator is
displayed while charging.
❇ The battery level indicator blinks while
charging. When charging is complete, the
blinking stops and the light level dims.
Storing the accessories
❇ When accessories are disassembled to be
stored, dust may fall from the suction part
of the vacuum cleaner.
❇ After cleaning, shorten the pipe length and
operate in MAX mode for 10 seconds.
Storing the wet brush
When the brush holder is connected to the
charging stand, the wet brush can also be
stored at the charging stand.
❇ Do not connect the mini motorized tool to
the brush holder, or it may get damaged.
❇ Clean and dry the wet pad brush pads
before putting them away. When stored
near a wall, the pads may touch the wall
2
and get it dirty if they are not completely
clean and dry.
❇ When disconnecting the brush holder, press
the 2 release buttons on the holder.