Operating the Choke
Use the choke to start a cold engine.
1.
Pull up the choke knob to engage the choke
before using the key switch
2.
Push down the choke knob to disengage the
choke after the engine has started
Figure 20
1. O
position
N
Starting the Engine
Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure
to follow these instructions can burn out the
starter motor.
Note:
You may need multiple attempts to start the
engine the first time after adding fuel to an empty fuel
system.
(Figure
20).
(Figure
20).
g008959
2. O
position
FF
23
Figure 21
g032328