Table of Contents
Advertisement
Home Connect
en
If the appliance automatically tries to connect to the
app,
and
are displayed alternately. The
•'
ƒ
value
‚
flashes in the control panel.
Start the app on the mobile device and follow the
6.
instructions for manual network registration.
The registration procedure has been completed once
the
value appears on the cooking position display.
‹
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
In the basic settings for your hob, navigate to the Home
Connect settings to display network and appliance
information.
Symbol
Function
Registration in the home network (WLAN)
•'‚
Not connected /disconnect network.
‹
Connect automatically.
‚
Connect manually.
ƒ
Connected.
„
Connection to app
•'ƒ
Not connected.
‹
Connect.
‚
Connect to WLAN
•'„
Radio module switched off.
‹
Radio module switched on.
‚
•'...
Settings via app
Switched off.
‹
Switched on.*
‚
Software update
•'†
Update available and ready for installation.
‚
Starting installation.
ƒ
Remote access by Customer Service
•'‡
Not permitted.
‹
Permitted.
‚
* Basic setting
32
Symbol
Function
WLAN signal strength
•'ˆ
Not connected to home network (WLAN).
‹
Signal strength 1 (poor)
‚
Signal strength 2 (moderate)
ƒ
Signal strength 3 (good)
„
Connection to Home Connect server
•'‰
Not connected.
‹
Connected.
‚
* Basic setting
Notes
The
setting is only displayed if the appliance is
•'ƒ
■
connected to the home network.
The
setting is only displayed if the appliance
•'„
■
has once connected to a network.
The
setting is only displayed if an update is
•'†
■
available.
The
setting is only displayed if Customer
•'‡
■
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
The
and
•'ˆ
•'‰
■
there is a connection to WLAN.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the Home
Connect functions.
Note:
In networked standby mode, your appliance requires a
maximum of 2 W.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the
symbol repeatedly until
t
3.
displayed alternately.
lights up in the cooking position display.
‚
Set the
value on the control panel.
‹
4.
This deactivates Wi-Fi; the
control panel.
settings are only displayed if
symbol for four seconds.
t
and
•'
symbol will go out on the
D
are
„
Advertisement
Table of Contents
