Table of Contents
Advertisement
Home Connect
en
Manual registration in the home network
Touch the
symbol for 4 seconds.
t
1.
Product information will be displayed.
Touch the
symbol repeatedly until
t
2.
displayed alternately.
lights up in the cooking position display.
‹
Set the
value on the control panel.
ƒ
3.
and the
symbol will flash on the cooking
ƒ
D
position display.
Use the "Home Connect" SSID and the "Home
4.
Connect" key to register the mobile device on the
hob network.
28
and
are
•'
‚
5.
The log-in procedure has been completed once the
‹
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
In the basic settings for your hob, navigate to the Home
Connect settings to display network and appliance
information.
Symbol
•'‚
‹
‚
ƒ
„
•'ƒ
‹
‚
•'„
‹
‚
•'...
‹
‚
•'†
‚
ƒ
* Basic setting
The hob is connected to the home network if the
symbol no longer flashes but is lit up on the
D
cooking position display.
The appliance automatically tries to connect to the
app, and
and
are displayed alternately. The
•'
ƒ
value flashes on the control panel.
‚
Start the app on the mobile device and follow the
instructions for manual network registration.
value appears in the cooking position display.
Function
Registration in the home network (WLAN)
Not connected /disconnect network.
Connect automatically.
Connect manually.
Connected.
Connection to app
Not connected.
Connect.
Connect to WLAN
Radio module switched off.
Radio module switched on.
Settings via app
Switched off.
Switched on.*
Software update
Update available and ready for installation.
Starting installation.
Advertisement
Table of Contents
