Microtech AiDEX User Manual page 62

IEC60601-1-2
The device is intended for use in the electromagnetic environment
specified below. The user of the device should ensure that it is used
in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emis-
sions IEC 61000-
3-2
Voltage
fluctuations/
Flicker emissions
IEC 61000-3-3
58
Guidance and manufacturer's declaration –
electromagnetic immunity
Compliance
Group 1
Class B
Class A
Complies
Electromagnetic environment -
guidance
The device uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in near-
by electronic equipment.
The device is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-volt-
age power supply.
Move to a place within the normal
operating temperature range and
repeat the test.
Repeat test. If you see the same
result, contact your healthcare
professional immediately.