Microtech AiDEX User Manual page 50

properly. Control solution 1 is usually used first and
control solution 2 is used when a second level test
is required. MicroTech offers a separately available
control solution package that contains both Control
Solution 1 and Control Solution 2. Always use a control
solution for quality control testing to ensure you get
accurate blood glucose levels.
You should perform the control solution test below
if you suspect that the meter or test strips are not
working properly or when you suspect that your test
results are inaccurate, or inconsistent with how you
feel:
• When the PDA display is on,
just insert a test strip into the
PDA's test strip port and the
blood glucose test screen will
appear. Check the "Control
Solution Test" check box at the
bottom. The animation will be
replaced with an animation of
46