Control Panel - LG LDFC2423W.ABWEEUS Owner's Manual

Table of Contents

Advertisement

Control Panel

Control Panel Features
Power On/Off Button
a
• Press this button to turn the washer on or off.
• If there is a power surge, power outage, or disruption of any kind, power is automatically turned off
for safety.
• When power is connected again, the dishwasher will turn on automatically and resume the cycle.
NOTE
• When opening or closing the product door, keep fingers and hands away from the control panel to avoid
activating buttons.
Display
b
• Rinse Aid
- This LED illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse
aid is refilled or the level is set to 0.
- Refer to the Rinse Aid Dispenser Adjustment section.
: Digital Display
8:88
- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and
options are selected, the display shows the total estimated time to complete those selections.
During operation, the display shows the remaining estimated operating time.
NOTE
• The estimated time shown on the display does not include delay times for heating water, etc.
• If Delay Start is selected, the display shows the delay time in hours.
• Cycle time may vary depending on the soil level of your load.
• Ctrl. Lock,
: Control Lock
CL
- The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this
feature locks all of the buttons, except for the Power button, on the control panel. This feature
does not lock the door.
- While a cycle is running, press and hold Flex Zone and High Temp. simultaneously for three
seconds to activate or deactivate Control Lock.
- To start a new cycle, deactivate Control Lock.
• Tub Clean
- The Tub Clean LED flashes every 30 cycles. To activate or deactivate the LED, press and hold the
Cycles and High Temp. buttons for three seconds.
- Select the Auto cycle and follow the instructions in the Maintenance section to clean the tub.
• Sanitized
- If the High Temp. option is added to a cycle, the Sanitized LED stays lit at the end of the cycle if the
dishes were properly sanitized.
OPERATION
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents