Table of Contents
Advertisement
Names of Parts
Hot water side
mounting leg
Temperature
Check valve
control handle
P.47
Safety button
Main unit
Spout
(Open/Close)
changeover handle
Water discharge port
Arch-handle type
Arch-handle type
(changeover
handle)
35
Water side
<Mounting legs>
mounting leg
(2 legs on hot water side and
cold water side)
Filter
P.43
Shower-exclusive type
Open/Close handle
Before use
Structure of thermostat-controlled hot/cold water faucet
The thermostat-controlled hot/cold water
faucet mixes hot water and cold water to
control the temperature of the discharged
water.
Therefore, the discharge temperature is
lower than the temperature that is set in
the hot water supply equipment.
(Ex.)
Even if the temperature of the hot water
supplier is set to 40°C and the number on
the water faucet is "40", water is discharged
at 37°C, as the water supply temperature
differs according to the conditions of use
such as water pressure, etc.
The temperature control handle is set at the factory, but the water
discharge temperature may not be as displayed due to the conditions of
use (cold/hot water supply pressure and temperature).
"40"
Instantaneous
hot-water
heater
40°C
37°C
36
Advertisement
Table of Contents
