AEG T9DHC966C User Manual page 26

Table of Contents

Advertisement

26
www.aeg.com
Problem
The loading
door does not
close
It is not possible
to change the
program or
option.
It is not possible
to select an op‐
tion. An acoustic
signal is emit‐
ted.
There is no
drum light
Unexpected du‐
ration time ap‐
pears on the
display.
A program is
inactive.
The drying cycle
is too short.
Drying cycle too
5)
long
Possible cause
The filter is not locked into posi‐
tion.
Laundry is trapped between the
door and the seal.
After a cycle starts it is not possi‐
ble to change the program or
option.
The option you tried to select is not
available for the selected program.
Defective drum lamp.
The drying duration is calculated
according to load size and damp‐
ness.
The water container is full.
The load size is small.
The laundry is too dry.
The filter is clogged.
The load is too large.
The laundry was not spun suffi‐
ciently.
Too low or too high room tempera‐
ture - this is not the appliance mal‐
function.
Remedy
Put the filter in the correct position.
Remove trapped items and close
the door.
Turn the tumble dryer off and on.
Change the program or option as
required.
Turn the tumble dryer off and on.
Change the program or option as
required.
Contact the service centre to re‐
place the drum lamp.
This is automated - the appliance
is working correctly.
Drain the water container, push the
2)
Start/Pause button.
Select a time program. The time
value must be related to the load.
To dry one item or a small amount
of laundry we recommend short
drying times.
Select an appropriate time pro‐
gram or a higher dryness level
extra dry )
(e.g.
Clean the filter.
Do not exceed the maximum load
size.
Spin the laundry well in the wash‐
ing machine.
Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach‐
ieve best drying results is between
18°-25°C.

Advertisement

Table of Contents
loading

Table of Contents