Network Connection - Waveshare WS-431E User Manual

WS-431E
4G Router

3.1.2. NETWORK CONNECTION

Internet test: Power on the WS-431E, wait for about 2 minutes, the 2/3G indicator starts to light,
indicating that the 4G network of the router is successful, then you can directly surf the Internet.
Let's go to the Settings to check the network status through the default parameters of WS-431E.
Default parameters of WS-431E as follows:
SSID
IP Address
User name
Password
WLAN Password
Take default parameters as example: User can connect PC to SSID WS-431E-XXXX. Then open
browser and enter 192.168.1.1, log in with User name and Password(both are admin), user can
enter WebServer.
www.waveshare.com
Figure 5 4G indicator (3G+2G)
WS-431E-XXXX
192.168.1.1
admin
admin
www.waveshare.com
9 / 68 www.waveshare.com/wiki