5G CPE BOX adopts a built-in radiator design, it can work normally at -30℃ ~ 70℃ and can work stably for a long time in the complex environment of the vehicle.
Page 5
Dedicated in-vehicle Gigabit Ethernet interface 5G CPE BOX uses a dedicated in-vehicle Gigabit Ethernet interface, using a 10 PIN connection method, all around the Ethernet port is shielded by metal, which can better prevent electromagnetic interference. At the same time, a metal elastic buckle is added to the Ethernet port connector, which can be effectively fixed to ensure the reliable and stable operation of the Ethernet interface in a vibration environment such as a vehicle.
5G CPE BOX_User Manual 2 Appearance 2.1 Product Interfaces Interface Description ① SIM card cover Status indicator: Indicate the status of power on, network, etc. ② ③ Interface indicator: Indicate the status of Wi-Fi, network port, etc. ④ BMW head interface (reserved interface, not exposed by default) ⑤...
5G CPE BOX_User Manual 2.2 LED Indicator Status After the device is powered on, the red is always on, and it will be displayed according to the following status after booting: Register 5G network, strong signal, steady blue; Register 5G network, weak signal, blue blinking; Register 4G network, strong signal, steady green;...
5G CPE BOX_User Manual 3 Installation diagram 5G CPE BOX provides installation accessories, which can be installed by screwing or fixing with adhesive. Install the accessories on both sides of the device Fixed with screws on both sides Fixed with adhesive on both sides...
5G CPE BOX_User Manual 4 Product Features 4.1 First boot Open the SIM card cover, after installing the SIM card, close the SIM card cover; Connect the power adapter, the device will power on automatically; Check the status of the device through the LED; The terminal connects to the device by Ethernet cable or Wi-Fi;...
5G CPE BOX_User Manual 4.3 Home Click the icon on the homepage to view the basic information of the device. Internet Information:After clicking the icon, you can view the internet mode, network status, connection uptime, MAC address, IP address and other information. 9/26...
Page 11
5G CPE BOX_User Manual Wi-Fi Status: Click the icon to view the SSID and password information of Wi-Fi 2.4G and Wi-Fi Clients: Click the icon to view the host name, MAC address and IP address of the currently connected terminal. 10/26...
5G CPE BOX_User Manual 4.4 SMS InBox: Click the icon to view the messages received by the device. OutBox: Click the icon to view the messages sent by the device. 11/26...
5G CPE BOX_User Manual DraftBox: Click the icon to view draft messages saved in the device. 4.5 Settings 4.5.1 Internet 4.5.1.1 Mobile Connection Through the mobile connection menu, you can configure the device's mobile network, data roaming, network mode, network search mode, and APN parameters, etc. Mobile network: Enable/Disable 5G/4G/3G data services;...
5G CPE BOX_User Manual 4.5.1.2 RF Parameters Through the RF parameters menu, you can view the basic parameters of the current network of the device. 14/26...
5G CPE BOX_User Manual 4.5.2 Wireless 4.5.2.1 WLAN Settings Through the WLAN settings menu, you can set the relevant parameters of Wi-Fi 2.4G and Wi-Fi 5G. The “Auto” setting of Wi-Fi channel and channel width is recommended. 15/26...
5G CPE BOX_User Manual 4.5.2.2 WLAN MAC Filter Through the WLAN Mac Filter menu, you can configure the rules of WLAN MAC filter to enable or disable certain Wi-Fi terminals from accessing the device. 4.5.3 Network 4.5.3.1 DHCP Through the DHCP menu, you can configure the routing parameters of the device. 16/26...
5G CPE BOX_User Manual 4.5.4 Features 4.5.4.1 Firewall Through the Firewall menu, you can enable or disable the device's firewall, IP filter, MAC filter, and WAN ping. 4.5.4.2 IP Filter Through the IP Filter menu, you can configure the IP Filter rules of the device, including LAN IP address, LAN port, WAN IP address, WANP port, protocol, etc.
5G CPE BOX_User Manual 4.5.4.3 Mac Filter Through the Mac Filter menu, you can configure Mac filter rules to enable or disable certain LAN-side terminals from accessing the device. Disable: disable the Mac address filter function; Whitelist: only allow terminals in the whitelist to access the Internet; Blacklist: do allow the terminals in the blacklist to connect to the device;...
5G CPE BOX_User Manual 4.5.4.5 DMZ Settings Through the DMZ Settings menu, the external network can be allowed to connect and communicate with the internal LAN terminal through the designated DMZ host IP address. 4.5.5 Management 4.5.5.1 SNTP Through the SNTP menu, you can set the network synchronization time, time synchronization server, time zone and daylight saving time.
5G CPE BOX_User Manual 4.5.5.2 PIN Management Through the PIN management menu, you can enable or disable the SIM card PIN code. Please contact your service provider for initial PIN code. 4.5.5.3 Device Information Through the Device Information menu, you can view basic information such as device name, software version, and hardware version, etc.
5G CPE BOX_User Manual 4.5.5.4 Statistics Through the Statistics menu, you can view traffic usage and support the configuration of monthly traffic plans. The traffic statistics displayed on this page is calculated by the device and is for reference only. Please contact your service provider for actual data usage.
5G CPE BOX_User Manual 4.5.5.6 Upgrade Through the Upgrade menu, you can check whether there is an online upgrade version and upgrade. 4.5.5.7 Reboot & Reset Through the Reboot & Reset menu, you can reboot the device or reset the device parameters to the factory default state.
5G CPE BOX_User Manual 5 Troubleshooting When the equipment is abnormal, please refer to this chapter for simple troubleshooting first, which can save your time and energy. If the problem persists, please contact your service provider for support. Cannot connect to Wi-Fi Problem Description: The terminal cannot connect to the device through Wi-Fi.
Page 27
5G CPE BOX_User Manual Confirm whether the device normally resides on the Internet; When the above steps are all checked, you can try to restart the device or restore the device to factory settings; If the problem persists, please contact your service provider. 26/26...