Openvpn - Waveshare WS-431E User Manual

WS-431E
4G Router
includes encryption mode, integrity scheme and DH exchange algorithm in IKE stage; IKE life
time: set the life cycle of IKE, in seconds, the default is 28800;
Authentication type: currently, the authentication mode of pre-shared key is supported;

ESP encryption algorithm: the second stage includes the encryption mode and integrity

scheme;
ESP life time: set the ESP life cycle in seconds, and the default value is 3600;

Perfect Forward Secrecy (PFS) for Session Key Encryption: There are four options: disabled,

DH1, DH2 and DH5. This setting should be consistent between this end and the peer.
Enable DPD Detection: What action should be taken when the DPD declares the peer as

dead.
DPD detection period: Set the time interval of connection detection (DPD);

DPD timeout: Set the connection detection (DPD) timeout;

DPD operation: Set the operation of connection detection. Including restart, dismantle,

keep, none, restart by default;
IPSec Connection Successful: After successfully establishing an IPSec connection with the

remote endpoint, navigate to the VPN-to-VPN Status section to check the connection status.

4.7.4. OPENVPN

Enable OpenVPN to build VPN, and you can choose TUN (routing mode) or TAP (bridge mode)
internally:
www.waveshare.com 65 / 68 www.waveshare.com/wiki