Waveshare WS-431E User Manual page 24

WS-431E
4G Router
The static route has the following parameters. By default, a maximum of 20 static routes can be
added.
Name
port
Object (destination
address)
Subnet mask
Gateway (Next hop)
Metric
Static route describes the routing rules of Ethernet packets.Test example: Test environment, two
flat routers A and B, as shown below.
The WAN ports of routers A and B are connected to the network at 192.168.0.0. The LAN port of
router A is on the 192.168.2.0 subnet, and the LAN of router B is on the 192.168.1.0 subnet.Now,
if we want to make A route on router A so that when we access the 192.168.1.x address, it is
automatically forwarded to the router
www.waveshare.com
Description
Lan, wan_4G, wan_wired,
interfaces
The address or address range of the
object to be accessed
The subnet mask of the object network
to be accessed
The address to forward to
Number of packet hops
Figure 27 Static route parameter table
Figure 28 Static routing table example diagram
24 / 68
Default parameter
vpn
Lan
empty
empty
empty
empty
www.waveshare.com/wiki