Milwaukee 6065 Operator's Manual
Hide thumbs
Also See for 6065:
- Operator's manual (33 pages) ,
- Operating instructions (5 pages) ,
- Operator's manual (22 pages)
Related Manuals for Milwaukee 6065
Summary of Contents for Milwaukee 6065
- Page 1 OPERATOR'S MANUAL Cat. No. / No de cat. 6065, 6065-6, 6066, 6066-6, 6072, 6078 SANDERS PONCEUSES LIJADORAS WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
GENERAL POWER TOOL • Do not overreach. Keep proper footing and balance at all times. This enables better control of the power SAFETY WARNINGS tool in unexpected situations. Read all safety warnings, instruc- WARNING • Dress properly. Do not wear loose clothing or tions, illustrations and specifica- jewelry. - Page 3 "live" and could portant information. If unreadable or missing, contact give the operator an electric shock. a MILWAUKEE service facility for a free replacement. • Position the cord clear of the spinning accessory. •...
-
Page 4: Extension Cords
• Protect your extension cords from sharp objects, cord or plug is damaged. If damaged, have it excessive heat and damp or wet areas. repaired by a MILWAUKEE service facility before Recommended Minimum Wire Gauge use. If the plug will not fit the outlet, have a For Extension Cords* proper outlet installed by a qualified electrician. -
Page 5: Functional Description
WARNING unplug tool before changing or removing accessories. Removing and Replacing Quik-Lok Cords ® (Select Models) MILWAUKEE's exclusive Quik-Lok Cords provide ® instant field replacement or substitution. 1. To remove the Quik-Lok Cord, turn the cord nut ® 1/4 turn to the left and pull it out. -
Page 6: Operation
OPERATION Installing Backing Pad and Sanding Discs 1. Unplug tool and place it upside down on a level To reduce the risk of injury, always WARNING surface as shown. WARNING! Always unplug wear safety goggles or glasses tool before changing or removing accessories. with side shields. -
Page 7: Troubleshooting
Return the tool to a MILWAUKEE service facility for repair. After six months to one year, depending on use, return the Hold at a tool to a MILWAUKEE service facility for inspection.