Bosch Intuvia BUI255 Owner's Manual page 15

board computer is inserted in the holder (4), you can
also press the i button (10) on the control unit.
To change the basic settings, press the on/off but-
ton (5) next to the – indicator to reduce or scroll
down, or the lighting button (2) next to the + indica-
tor to increase or scroll up. If the on-board computer
is inserted in the holder (4), it is also possible to
change the settings with the – (11) and + (12) but-
tons on the control unit.
To exit the function and save a changed setting, press
the RESET button (6) for 3 s.
You can choose between the following basic settings:
– <– Clock +>: Setting the current time. The time
can be changed faster by pressing the setting but-
tons for longer.
– <– Wheel circum. +>: Changing the value pre-set
by the manufacturer by ±5 %. This menu item is
displayed only when the on-board computer is in
the holder.
– <– English +>: Changing the language of the text
indicator. You can choose between German, Eng-
lish, French, Spanish, Italian, Portuguese, Swedish,
Dutch and Danish.
– <– Unit km/mi +>: Displaying the speed and dis-
tance in either kilometers or miles.
– <– Time format +>: Displaying the time in 12-hour
or 24-hour format.
– <– Shift recom. on +>/<– Shift recom. off +>:
Switching the shift recommendation display on or
off.
– <Power-on hours>: Total time traveled with the
eBike (cannot be changed)
– <Displ. vx.x.x.x>: Display software version.
– <DU vx.x.x.x>: Drive unit software version. This
menu item is displayed only when the on-board
computer is in the holder.
– <DU SN xxxxxxx/xxx>: Drive unit serial number.
This menu item is displayed only when the on-
board computer is in the holder.
Bosch eBike Systems
– <DU PN xxxxxxxxxx>: Drive unit part number.
This menu item is displayed only when the on-
board computer is in the holder and the drive unit
has access to a part number.
– <Service MM/YYYY>: This menu item is displayed
if the bicycle manufacturer has set a fixed service
date.
– <Serv. xx km/mi>: This menu item is displayed if
the bicycle manufacturer has set a service date af-
ter a certain traveling distance.
– <Bat. vx.x.x.x>: eBike battery software version.
This menu item is displayed only when the on-
board computer is in the holder. When using two
eBike batteries, the software versions of both eBike
batteries are displayed successively.
– <Bat. PN xxxxxxxxxx>: eBike battery part num-
ber. This menu item is displayed only when the on-
board computer is in the holder and the eBike bat-
tery has access to a part number. When using two
eBike batteries, the software versions of both eBike
batteries are displayed successively.
– <Cha. vx.x.x.x>: Software version of the charger
used to charge the eBike battery. This is displayed
only if the charger has access to the software ver-
sion.
– If the eBike is equipped with ABS, the software ver-
sion, serial number and part number of the ABS are
also displayed.
English – 13
1 270 U20 XBI | (14.03.2023)