Advertisement
Clutch hydraulic release control - Travel adjust
1. If the position of the clutch pedal (1) requires adjust-
ment, or after a clutch overhaul, check that main clutch
pedal travel (A) is between 148 - 152 mm (5.8268 -
5.9842 in). If not, adjust as follows:
• Loosen the locknut (1) and turn the nut (2) anticlock-
wise.
• Check that travel is between 148 - 152 mm (5.8268
- 5.9842 in).
• Tighten the locknut (1).
• Operate the unit four or five times.
• Check that the clutch pedal (1) travel is as pre-
scribed.
• If necessary, reset to the correct value (A), as previ-
ously described.
• After having correctly adjusted pedal travel, check
that the entire distance is travelled with a maximum
load of 190 N·m (140.14 lb ft).
Clutch - Clutch hydraulic release control
47888375 08/07/2016
18.2 [18.104] / 3
1
WLSPVNS18C1-48A
2
WLSPVNS18C1-49A
3
WLSPVNS18C1-50A
Advertisement
