Table of Contents
Advertisement
Press the
KJ
clock function button repeatedly until
4.
the
KJ
and
y
symbols light up.
Set the end of operation using the rotary selector
5.
(e.g.
:
o'clock).
‚ƒ
„‹
The appliance switches off and waits until the appropriate
time to switch on (
‚‚
:
‹‹
switches off automatically at the time set for the end of
operation (
‚ƒ
:
„‹
).
Turn the operating mode and temperature selector back to
6.
the
position.
Û
Press the
clock function button to exit the clock function.
KJ
7.
Setting the clock
You can only change the clock when no other clock function is
active.
Press the
clock function button repeatedly until
KJ
1.
the
and
symbols light up.
KJ
3
Set the clock using the rotary selector.
2.
The setting is applied automatically.
Rapid heat up
With
CircoTherm®, you can shorten the heat up time if your
3
selected temperature setting is higher than 100 °C.
Childproof lock
In this section, you can read about
how to lock your appliance
■
how to lock your appliance permanently
■
Lock
Once it has been locked, the appliance cannot be switched on
accidentally or by unauthorised users (e.g. by children playing).
To switch the appliance on again, you must unlock it. After
appliance operation, the appliance is not automatically locked.
Lock it again if necessary or activate the permanent lock.
Lock appliance
Switch off the appliance.
1.
Press and hold the
±
info button until
2.
temperature display.
Turn the temperature selector until
3.
temperature display.
Press and hold the
info button until the
±
4.
in the temperature display.
Note: If you try to switch the appliance on when it is locked, -
appears in the temperature display.
10
in the example). The appliance
™‚‹
appears in the
appears on the
™‚‚
symbol appears
‚
Note: During Rapid heat up, do not place any food in the
cooking compartment for as long as the
Set the operating mode and temperature.
1.
The appliance heats up.
Press the
clock function button repeatedly until the
KJ
2.
and
symbols light up and
f
Turn the rotary selector clockwise.
3.
In the clock display,
up. Rapid heat up is activated.
After reaching the set temperature, Rapid heat up switches off.
The
symbol goes out.
f
Checking, correcting or deleting settings
To check your settings, press the
1.
repeatedly until the corresponding symbol lights up.
If necessary, you can correct your setting using the rotary
2.
selector.
If you wish to cancel your setting, turn the rotary selector anti-
3.
clockwise to the original value.
Unlocking the appliance
Press and hold the
1.
temperature display.
Turn the temperature selector until
2.
temperature display.
Press and hold the
3.
out.
Permanent lock
Once it has been permanently locked, the appliance cannot be
switched on accidentally or by unauthorised users (e.g. by
children playing).
To switch the appliance on, you must interrupt the permanent
lock briefly. After you have switched your appliance off, it locks
again automatically.
Locking the appliance permanently
Switch off the appliance.
1.
Press and hold the
2.
temperature display.
Turn the temperature selector until
-
3.
†
temperature display.
Press and hold the
4.
Your appliance will be locked after 30 seconds. The
symbol appears on the temperature display.
f
symbol is lit.
appears in the clock display.
Œ
is displayed and the
Ž
f
clock function button
KJ
info button until
appears in the
±
™‚‚
appears on the
™‚‹
±
info button until the
‚
symbol goes
info button until
appears in the
±
™‚‹
™ƒ‚
appears on the
info button for 3 seconds.
±
KJ
symbol lights
‚
Advertisement
Table of Contents
