Installation; Removing Packing; Removing Transit Bolts - LG WD-14080FDS Owner's Manual

Installation

I

Removing packing

Washer
Base Packing
WARNING
• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
There is a risk of suffocation ! Keep all packaging well away from children.
I

Removing transit bolts

To prevent internal damage during transport, the 4 special bolts are locked.
Before operating the washer, remove the bolts along with the rubber bungs.
If they are not removed, it may cause heavy vibration, noise and malfunction.
8
1. Remove the cardboard box and
2. Lift the washing machine and remove
3. Remove the tape securing the power
4. Remove the inlet hose from the drum.
Spanner
1. Unscrew the 4 bolts with
2. Take out the 4 bolts along with the
3. Close the holes with the caps supplied.
Transit bolt
styrofoam packing.
the base packing.
supply cord and drain hose.
NOTE
• Keep the spanner in base packing
for leveling.
the spanner supplied.
rubber bungs by slightly twisting the
bung.
NOTE
• Keep the transit bolts for future use.