Starting Of The Program; Cancelling (Resetting) The Program - Beko BDFN36650XC User Manual

EverClean Function
(depends on the model)
When you activate this function, your micro-
filter is cleaned with a special system at the
end of the washing cycle and is ready for
the next use. With this cleaning process,
the cleaning period of the micro-filter can
be increased from 2 weeks to 3 months
and the washing performance is improved.
In order to use this function effectively, it is
recommended to use it in every washing
cycle.
There are two options for this function,
"Enabled" and "Disabled".
To change the filter cleaning setting:
1. When the door is closed, after
turning on your machine with the On/
Off button, enter the Sub-Menu by
pressing the On-Off and P2 program
buttons simultaneously for 3 seconds.
2. Press the P2 program button, and go to
the "F:" position on the display. At the
same time, the filter cleaning function
indicator is activated on the display.
3. Select "F:0" or "F:1" position using
the P3 button. Filter cleaning function
is enabled at "F: 1" position, and is
disabled at "F: 0" position.
4. Exit the settings menu by pressing
the On/Off button for 3 seconds. Your
settings will be saved automatically.
IonGuard function
(depends on the model)
IonGuard function is enabled at regular
intervals and prevents the formation of
bad odours due to putrefaction. If this
function is selected, it will be activated
while the product is turned off and the
IonGuard indicator on the panel will flash.
A ventilation noise can be heard, this
is normal. Until the function selection is
disabled, system is automatically activated
intermittently.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.

Starting of the program

Close the door to start your machine after
selecting the program and additional
functions.
Machine softens the water as per
the hardness of the mains water. The
washing period may change while the
program is being executed depending
on the room temperature, mains water
temperature and the amount of dishes.
Care to avoid opening of the door
while the machine is being operated.
Be careful as steam may come
out when you open the door of the
machine.
To ensure that the water remaining
on the dishes and inside the machine
is completely drained and that the
water softener is removed after rinsing
operation, your machine resumes
operation at drying cycle after keeping
silent for a while.
Cancelling (Resetting) the
program
With the door closed, press the Program
Selection/Program Cancellation button
for 3 seconds. Display shows 0:01 after
a 3 - 2 - 1 countdown. Wait for discharge
35/EN