Table of Contents
Advertisement
6.5 SCHEDULING THE
WASHING TIME
Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
program until 24 hours.
1.
Press the Time Delay function key
after selecting the washing program
and other auxiliary functions.
2. Once you press the Time Delay key,
Display Information Line will show
"0:30" and Time Delay indicator will
start flashing.
3. Set the desired time by pressing the
Time Delay key. Time will increase
with increments of 30 minutes up
to 6 hours and after that in 1 hour
increments up to 24 hours every time
you press the key.
4. Close the door of your machine after
setting the Delayed Start. Once
the delay time is over, the selected
program will start automatically.
Changing the settings while Time
Delay function is active
While the Time Delay function is activated,
you cannot make changes in the washing
program, auxiliary functions or the duration
of delay time.
Program and auxiliary functions cannot
be set/changed after the program has
started.
To cancel the Time Delay function
Open the door of the product Press and
hold the Program Selection / Program
Cancel keys for 3 seconds. After the 3 -
2 - 1 countdown, 0:01 is displayed, close
the door of the product and wait for the
draining process complete. Draining is
completed in 2 minutes and the machine
gives an audible warning when it is
completed.
You can select and start a new
program following the cancellation of
Time Delay function.
Time Delay function cannot be set
after the program starts.
6.6 STARTING THE
PROGRAM
Close the door of your machine to start it
after selecting the program and auxiliary
functions.
Select Models: Your machine performs
water softening depending on the
hardness level of the supply water.
Washing time can change while the
program is running depending on the
ambient temperature where your
machine is installed, temperature of
the supply water and amount of the
dishes.
Pay attention not to open the door of
the machine when it is running. There
may be a rush of vapour when you
open the door of your machine; be
careful.
The machine will be switched off if
no button is pressed within 5 seconds
after opening the door while the
machine is running.
After the door has been opened, if any
button is pressed within 5 seconds
and the door is closed, the selected
program resumes; otherwise, the
machine will be switched off.Open
the door after the machine has been
switched off, press On/Off button and
close the door within 5 seconds. The
program will resume washing.
The machine will remain silent in pause
mode for some time in order to remove
the water from the machine and on
the dishes completely and to have the
32
USA
Advertisement
Table of Contents
