Transportation And Storage; Environmental Protection - Ryobi EMS216L Manual

WARNING
Do not attempt to disassemble the blade guard assembly
for cleaning or repair. Damaged guards should not be
used. Return to an authorised service centre for repair
or replacement.
WARNING
For greater safety and reliability, all repairs should be
performed by an authorised service centre.
Maximum cutting depth stop
The maximum cutting depth stop is to prevent the saw blade
from cutting into the metal base of the unit.
WARNING
The maximum cutting depth stop is not user adjustable.
Do not adjust the maximum cutting depth stop.

TRANSPORTATION AND STORAGE

■ When storing the product, disconnect the power cord.
Store the product in a secure place that is not accessible
to children. Store the power cord as shown in the
illustration on page 217 - 218 of this manual.
■ Clean the product using a brush and vacuum cleaner
before storage.
■ If you remove the saw blade or keep spares with the
unit, ensure they are in the original packaging to prevent
injury.
To secure the product prior to movement:
■ The product should be stored at the zero degree mitre
and bevel angle and locked in position. The slide should
be locked. The handle should be locked in the lower
(safe) position with the guards closed.
■ One or both sides of the work piece supports can be
removed for ease of carrying.
To move or transport in a vehicle:
■ Secure the product prior to movement as described in
the manual.
■ Remove the product from the bench top by releasing the
4 bolts, one at each corner. Secure the bolts for future
use. Lift the product using the handle at the top.
■ When lifting to a height, two persons wearing heavy
gloves are needed to lift the base of the product.
■ When transporting in a vehicle, set the product on its
base and secure against movement.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOL
Safety alert
European Conformity Mark
British Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
Please read the instructions
carefully before starting the
machine.
Class II tool, double insulation
Wear ear protection
Always wear eye protection.
Keep hands away from the cutting
area and sharp blade.
Wear safety gloves
Blade rotation direction (shown on
saw blade)
Blade rotation direction (shown on
blade guard)
Blade width of cut (Kerf)
Number of teeth on this saw blade
For cutting wood and analogous
material
Not for cutting metals
Laser radiation.
LASER
Do not stare into beam.
2
Class 2 laser product
7
Original Instructions