Table of Contents
Advertisement
Available languages
Available languages
WARNING
TRANSPORTATION AND STORAGE
When storing the product, disconnect the power
cord. Store the product in a secure place that is not
accessible to children. Store the power cord as shown
in the illustration on page 253 - 256 of this manual.
Clean the product using a brush and vacuum cleaner
before storage.
If you remove the saw blade or keep spares with
the unit, ensure they are in the original packaging to
prevent injury.
To secure the product prior to movement:
The product should be stored at the zero degree mitre
and bevel angle and locked in position. The slide should
be locked. The handle should be locked in the lower
(safe) position with the guards closed.
One or both sides of the work piece supports can be
removed for ease of carrying.
legs:
Secure the product prior to movement as described in
the manual.
two operators wearing heavy duty gloves. One operator
should stand at the front while the second operator is
at the back of the saw stand. Both operators must hold
the top of each leg and carefully lift the whole assembly.
To move longer distance or in a vehicle:
Secure the product prior to movement as described in
the manual.
The stand must be removed by releasing the 4 bolts,
one at each corner. Secure the bolts for future use. Lift
the product using the handle at the top.
When lifting to a height, two persons wearing heavy
gloves are needed to lift the base of the product.
When transporting in a vehicle, set the product on its
base and secure against movement.
Lay the stand on its side or dismantle and secure
against movement.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOL
Safety alert
CE conformity
EurAsian conformity mark
Ukrainian mark of conformity
Please
carefully
machine.
Class II tool, double insulation
Wear ear protection
Always wear eye protection.
Keep hands away from the cutting
area and sharp blade.
Wear safety gloves
Blade rotation direction (shown on
saw blade)
Blade rotation direction (shown on
blade guard)
Blade width of cut (Kerf)
Number of teeth on this saw blade
For cutting wood and analogous
material
Not for cutting metals
Laser radiation.
LASER
Do not stare into beam.
2
Class 2 laser product
English
read
the
instructions
before
starting
the
7
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
Advertisement
Table of Contents
