Auxiliary Panel Connectors - Asus TS300-E10-PS4 User Manual

14. Auxiliary panel connectors (20-pin AUX_PANEL2; 20-2 pin AUX_PANEL1)
These connectors are for additional front panel features including front panel SMB,
locator LED and switch, chassis intrusion, and LAN LEDs.
1. Front panel SMB (6-1 pin FPSMB)
These connectors connect the front panel SMBus cable.
2. LAN activity LED (2-pin LAN1LINK and 2-pin LAN2LINK)
These connectors are for Gigabit LAN activity LEDs on the front panel.
3. Locator LED (2-pin AUX_LOCLED1 and 2-pin AUX_LOCLED2)
These connectors are for the Locator LED1 and LED2 on the front panel. Connect
the Locator LED cables to these 2-pin connector. The LEDs will light up when the
Locator button is pressed.
4. Locator Button/Switch (2-pin AUX_BMCLOCBTN)
These connectors are for the locator button on the front panel. This button queries
the state of the system locator.
5. LAN activity LED and USB port (USB power and OC pin)
These leads are for the USB ports on the front or rear panel.
ASUS TS300-E10-PS4/PS8
4-19