Mounting The Server To The Rack - Asus TS300-E10-PS4 User Manual

3. Align the front end holes of a rack rail
pair to the 1U space.
4. Drive in two screws on the outer holes to
secure the front end.
5. Find the rear 1U space that corresponds to the front 1U space where you attached the
rail. Drive in two screws on the outer holes to secure the rear end.
6. From the rack front, find the corresponding 1U space for the second rail pair.
7. Repeat steps 3–6 to attach the second rail pair.
3.4

Mounting the server to the rack

To mount the server to the rack:
1. Align the server rails with the rack rails.
2. Press the lock on side of the rail and slide the server into the rack.
3. When the server is fully slide into the rack, secure both sides using screws.
3-4 Chapter 3: Installation Options