Asus TS300-E10-PS4 User Manual page 109

DMI Link ASPM Control [Auto]
Allows you to enable or disable control of active state power management of DMI link.
Configuration options: [Disabled] [L0s] [L1] [L0sL1] [Auto]
Port8xh Decode [Disabled]
Allows you to enable or PCI express port 8xh decode.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Port8xh Decode to [Enabled].
SATA And RSTe Configuration
SATA Controller(s) [Enabled]
Allows you to enable or disable the SATA Controller.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set SATA Controller(s) to [Enabled].
SATA Mode Selection [AHCI]
Allows you to select the SATA controllers operation.
Configuration options: [AHCI] [RAID]
Serial ATA Port 1-8
5-30
Port8xh Decode Port# [0]
Select PCI Express Port8xh Decode Root Port. User to ensure port
availability.
Configuration options: [0] - [23]
Port 1-8 [Enabled]
Allows you to enable or disable the SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug [Enabled]
Allows you to enable or disable this port as hot pluggable.
Configuration options: [Disabled] [Enabled]
Spin Up Device [Disabled]
Allows you to enable or disable Spin Up Device.
Configuration options: [Disabled] [Enabled]
SATA Device Type [Hard Disk Drive]
Allows you to identify the SATA port is connected to a solid state drive or a
hard disk drive
Configuration options: [Hard Disk Drive] [Solid State Drive]
Chapter 5: BIOS Setup