Pixel Mapping - Sony a7CR Help Manual

Help Guide
Interchangeable Lens Digital Camera
ILCE-7CR
α7CR

Pixel Mapping

You can manually optimize the image sensor (pixel mapping). If [Auto Pixel Mapping] is set to [Off], perform [Pixel
Mapping] regularly according to the following procedure. We recommend that you perform the operation once every
three days.
MENU → (Setup) → [Setup Option] → select [Pixel Mapping].
1
Select [OK] on the confirmation screen.
2
Pixel mapping will be performed.
The camera cannot be operated during pixel mapping.
The camera will restart when pixel mapping is complete.
Hint
When you turn the camera on, a message to perform pixel mapping will occasionally be displayed. If the message is displayed,
perform [Pixel Mapping].
If you see bright spots in a recorded image on the camera monitor, immediately perform [Pixel Mapping].
Note
Pixel mapping cannot be performed when the battery is low.
If [Pixel Mapping] is not performed regularly, bright spots may appear in recorded images.
Related Topic
Auto Pixel Mapping
5-054-923-11(1) Copyright 2023 Sony Corporation
485
TP1001167568