Sony a7CR Help Manual page 285

After recording starts, the video light will turn on/off repeatedly in conjunction with shooting/standby for each frame.
(A) Start of recording
(B) End of recording
(C) Video light on (At the start of recording, the video light turns on earlier than the number of seconds set in [
Light Setting])
(D) Video light off (The video light remains dimly lit when [Video Light Mode] is set to [REC Link&STBY])
In the following cases, however, the video light will remain lit even during shooting standby:
When [ Video Light Setting] is set to [Off].
When the time from the end of the frame shooting to the start of the next lighting is 5 seconds or less according to
the settings for [ Interval Time] and [
(A) Start of recording
(B) End of recording
(C) Video light on
Hint
When [Video Light Mode] is set to [Power Link], the video light turns on/off in conjunction with the power, regardless of the [
Video Light Setting] setting.
To enable interval operation with [
When you shoot a long time-lapse movie, it is recommended that you use an external power supply for the camera.
When [Auto Power OFF Temp.] is set to [High], the camera can continue movie recording even when the temperature of the
camera becomes high.
At the end of the time-lapse movie, a normal-speed movie may be recorded for about 1 second.
Related Topic
Interval Shoot Func.
Shoot Mode (S&Q/time-lapse)
Video Light Mode
Video Light Setting].
Video Light Setting], set [Video Light Mode] to [REC Link] or [REC Link&STBY].
285
Video
TP1001173390