Sony a7CR Help Manual page 371

Select [Subject Recognition AF] using the top/bottom/left/right side of the control wheel, and then press the
3
center.
If you press the center button while shooting and eyes are detected, [Subject Recognition AF] will activate and
the camera will focus on the eyes. Shoot images while holding down the center button.
To use different functions for the dials/wheel depending on the shooting mode
If you add a check mark to [Separate M mode and other modes.] when assigning functions to the dials/wheel, you can
assign different functions for [Manual Exposure] and the other exposure modes ([Intelligent Auto]/[Program
Auto]/[Aperture Priority]/[Shutter Priority]).
If you add a check mark to [Separate Flexible Exp. and Intelligent Auto.] when assigning functions with [
Key/Dial Set.], you can assign different functions for [Flexible Exp. Mode] and [Intelligent Auto].
Hint
By pressing a button to which a function can be assigned on the custom key setting screen, you can go to the setting screen for
the pressed button (except for some buttons).
You can also assign shooting functions to the focus hold button on the lens. However, some lenses do not have a focus hold
button.
Related Topic
Changing the function of the dial temporarily (My Dial Settings)
5-054-923-11(1) Copyright 2023 Sony Corporation
371
Custom
TP1001164945