Sony a7CR Help Manual page 303

Help Guide
Interchangeable Lens Digital Camera
ILCE-7CR
α7CR
Adjusting the exposure with touch operations (Touch AE)
You can automatically set the exposure based on the brightness of a point you touch.
Configure the settings as follows from MENU →
[Touch Operation]: [On]
[Touch Panel Settings] → [Shooting Screen] → [Shooting Screen]: [On]
MENU → (Setup) → [Touch Operation] → [Touch Panel Settings] → [Shooting Screen] → [Touch Func.
1
in Shooting] → select [Touch AE].
Touch the point that you want to set as the basis for the exposure.
2
The camera will set the exposure based on the brightness of the point you touched.
You can fine-tune the brightness with sliding the brightness adjustment bar that appears after touching.
Hint
The adjustment using the brightness adjustment bar is reflected in the exposure compensation value.
When [Touch Func. in Shooting] is set to [Touch Focus]/[Touch Tracking]/[Touch Shutter], you can select whether or not to
perform [Touch AE] at the same time by pressing the left or right side of the control wheel.
Note
[Touch AE] is not available in the following situations:
When using digital zoom function
If the subject is extremely bright or dark, the adjustment bar may not be sufficiently effective.
Related Topic
Touch Operation
Touch Panel Settings
(Setup) → [Touch Operation] in advance:
5-054-923-11(1) Copyright 2023 Sony Corporation
303
TP1001173309