Advertisement
Connecting LAN
LAN connection
Connect the router or switch to the monitor.
NOTE
•
The LAN cable is sold separately.
•
The following LAN cable type can be used: Standard: IEEE 802.3 ETHERNET
•
Connect the LAN cable and the peripheral devices to use the monitor.
- In order to use Ethernet in the PC, the USB-C cable must be connected to the PC.
•
The monitor and PC must be connected with a USB-C cable or USB-B cable to use wired LAN.
Connecting Peripherals
USB Device connection
The USB port on the product functions as a USB hub.
NOTE
•
It is recommended you install all Windows Updates to keep your Windows up-to-date before connecting to the
product for use.
•
Peripheral devices are sold separately.
•
A keyboard, mouse, or USB device can be connected to the USB port.
•
The charging speed may vary depending on the device.
•
To use the monitor' s downstream USB port, connection to the host PC must be established by using a USB C-C
or USB C-A cable for the USB-C port, or a USB B-A cable for the USB-B port.
•
When the USB C-C cable is connected between Upstream port of monitor and Host PC, the Downstream port of
monitor support USB 2.0 device.
•
When the USB C-A cable is connected between Upstream port of monitor and Host PC, the Downstream port of
monitor support USB 3.0 device.
However, Host PC & USB C-A cable must support USB 3.0 function.
CAUTION
Cautions When Using a USB Device
•
A USB device with an automatic recognition program installed, or that uses its own driver, may not be
recognized.
•
Some USB devices may not be supported or may not work properly.
•
It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not
adequate, the USB device may not be recognized properly.)
13
Advertisement
