Clock; Clock Reception - Oregon Scientific BAR610P User Manual

to initiate search and start receiving time and
temperature data from the sensor.
The sensor reception icon shows the status:
ICONS
NOTE After every sensor initialisation, the main unit
may take up to 30 minutes to receive the time from
the sensor.
8. Secure the sensor in the desired location using the
wall mount hole or double sided adhesive tape.
BAR610P_M_EN_R3.indd 4
MEANING
Main unit is searching
for sensor(s)
A sensor channel
has been found and
logged on
No sensor found
4
Get other manuals https://www.bkmanuals.com
For best results:
• Place the sensor within 30 m (100 ft) of the main
unit.
• Place the sensor out of direct sunlight and
moisture.
• Position the sensor so that it faces the main unit,
minimizing obstructions such as doors, walls and
furniture.
• Place the sensor in a location with a clear view to
the sky, away from metallic / electronic objects.
• Position the sensor close to the main unit during
cold winter months as below-freezing temperatures
may affect battery performance and signal
transmission.
TIP The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.
NOTE Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures
below freezing.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with a clock signal received from
provided remote sensor.
To enable / disable signal reception:
Press and hold UP to enable or DOWN to disable
signal reception.
12/9/08 17:55:46