GMC Canyon 2023 Owner's Manual page 69

GMC Canyon Owner Manual (GMNA-Localizing-MidEast-16512225) - 2023 -
CRC - 3/20/23
6. To tighten the belt, push down on the
child restraint, pull the shoulder portion
of the belt to tighten the lap portion of
the belt, and feed the shoulder belt back
into the retractor.
There must be finger clearance between
the push button and the child restraint.
If there is not clearance between the
buckle push button and the child
restraint, move the seat upward and
repeat prior installation steps. Otherwise
secure the child restraint in a rear seat.
When installing a forward-facing child
restraint, it may be helpful to use your
knee to push down on the child restraint
as you tighten the belt.
Try to pull the belt out of the retractor
to make sure the retractor is locked.
If the retractor is not locked, repeat
Steps 5 and 6.
7. Before placing a child in the child
restraint, make sure it is securely held in
place. Push and pull the child restraint in
different directions to be sure it is
secure.
If the airbag is off, the off indicator on the
passenger airbag status indicator will come
on and stay on when the vehicle is started.
If a child restraint has been installed and on
indicator is lit, see If the On Indicator Is Lit
for a Child Restraint under Passenger
Sensing System 0 45.
To remove the child restraint, unbuckle the
vehicle seat belt and let it return to the
stowed position.
Seats and Restraints 69