Advertisement
Step
1. Unplug your refrigerator and remove all food from the door shelves.
2. Remove the cover plate and the top hinge cover, then unscrew and remove the top
hinge. Keep the screws to reuse.
3. When the user removes the top hinge cover, note that the hinge cover can not be
directly removed,there is a sensor wiring harness connected to the box on the inside
side of the hinge cover, it needs to be slowly dismantled, and then take out the
sensor wiring harness from the inside side of the hinge cover, and attach the cover
.
Cover plate
ATTENTION
Images show a refrigerator that opens on the left side. Your refrigerator may open on the
right side.
4. Lift the freezer door up and away from your refrigerator.
5. Unscrew the three screws holding the center hinge, remove the hinge, then lift the
refrigerator door up and away from your refrigerator. Save the screws to reuse and
store the hinge in a safe place in case you need to reverse the door position again.
6. Remove the adjusting foot and screw installed on the bottom hinge before
removing the bottom hinge.
Reattach the bottom hinge
Hinge pin
7. Unscrew the screws holding the bottom hinge, then remove the bottom hinge from
the refrigerator.
Top hinge cover
Remove the bottom hinge
17
Center hinge
Hinge pin
EN
Advertisement
