User Defined Channel Table - Tektronix DS1001G User Manual

Reference

User Defined Channel Table

The User Channel Table selection in the Configure menu, allows you
to store several custom channel and frequency combinations in the
User Channel Table.
To create or modify the User Channel Table, press the CONFIG
button to access the Configure menu. Use the up and down arrow
buttons (↑ and ↓) to select the User Channel Table. Press the enter
button (↵) to enter the User Channel Table menu.
The television demodulator can store several custom channels and
frequencies. You can select from channels 1 to 50 using the up and
down arrow keys. Use the left and right arrow keys to set the new
frequency for the channel. The channel frequency is saved when you
either press the Config button or select another channel.
You select the User Defined channel table as you do other frequency
and channel tables. Refer to Program Configuration on page 3- -3 for
instructions on selecting a frequency table.
3- - 16
DS1001A/DS1001G User Manual