To Connect The Alarm Output - Daikin ETSXB16E Installer's Reference Manual

9 | Electrical installation

9.3.8 To connect the alarm output

Installer reference guide
128
3 Fix the cable with cable ties to the cable tie mountings. General information,
see "9.3.1 To connect the electrical wiring to the indoor
Wires: (2)×0.75 mm²
Maximum load: 0.3 A, 230 V AC
Maximum load: 1 A, 5 V DC
[9.D] Alarm output
1 Open the following (see
1 User interface panel
2 Switch box
3 Switch box cover
4 Top cover
2 Connect the alarm output cable to the appropriate terminals as shown in the
illustration below.
"7.2.6 To open the indoor
4
unit" [ 117].
4
unit" [ 73]):
4
3
2
1
EPRA14~18D + ETSH/X(B)16P30+50E
Daikin Altherma 3 H HT ECH₂O
4P679467-1C – 2023.07