Table of Contents
Advertisement
Quick Start
To get the most from your Airmotiv Flex Subwoofer, we urge you to read the entire manual. If you
just can't wait to hear how great your Flex Sub sounds, this section will cover the basics you need
to get started.
•
Find a secure location for your Flex Sub.
•
Make sure your Flex Sub is set for the proper line voltage for your area.
•
Connect your Flex Sub to the LFE or subwoofer output on your AVR or pre/pro.
•
Configure your AVR or pre/pro to work with a subwoofer.
•
Find some music you really like to listen to.
•
Enjoy!
While you're enjoying your Airmotiv Flex Sub, it would be a great time to read the rest of the
manual to learn more about them.
Setting The AC Line Voltage
Before plugging in your Airmotiv Flex Subwoofer for the first time, confirm that it is configured to
operate at the correct line voltage for your area. If you move to a different country, or a different
region, with a different line voltage, you MUST change the Line Voltage setting on your Flex Sub
to the correct line voltage.
Note: Attempting to operate your Flex Subwoofer with the Line Voltage Selector Switch set to
the wrong voltage for your area may result in damage to your Flex Sub.
To configure the AC Line Voltage for your Flex Sub, use a small screwdriver to slide the Line
Voltage Selector Switch to the proper position.
Note:
See pages 9 through 11 for the location of the Line Voltage Selector Switch. The currently
configured line voltage is displayed through the window on the top of the switch protector
cover.
AIRMOTIV F
lex
Page 6
S
ubwOOFeR
Advertisement
Table of Contents
