Mounting Filter/Dust Bag Holder; Mounting Handle To Filtration Housing - Craftsman SP5373 Owner's Manual

AG HOLDER
1_ LoCate the foUowing items from the loose parts bag:
Description Qty.
.....A Hex Nut* (M6 X 1) ................................ 1
B Lockwasher* (1/4) ........................... ..:: 1
C Flat Washer* (1/4x 1/2) ....................... 1
2_ Attach hexnut to threaded portion of Filter/Dust Bag
Holderand place lockwasher and flat washer on nut
as shown.
3, Insert Filter/Dust Bag Holder into threaded hole of
Filtration Housing as shwon.
4_ Turn Filter/DustBag Holderrod clockwise until nut is
secured to Filtration Housing.
5: Secure Fitter/Dust Bag Holder in place with adjust-
able wrench.
A
* Items are shown actual size
HEX N UT_._
LOCKWASH ER _e=
FLAT WASHER "-'''_ /"
i i
FILTER/
DUST BAG
HOLDER
1. Locate thefollowingDescription items fromtheioose pa_bag: A
A HexScrews* (M6x1;25) .................... _4 * Itemsareshownactual s ize
B Lockwashers* (1/4'_dia.) ....................... 4
C HexNuts* (M6xl) ........................... 4
C
2. Attach the ends of the Handle to the ReliefFlangeson
the side of Filtration Housing as shown.
3: lnsert hex screw through the Handle and Flange.
4. Attach the lockwasher and the hex nut to the screw
and tighten.
HAN D L E
HEX NUT "-'_
HEX
REUEF
FILTER/
DUST BAG
HOLDER
FILTRATION
HOUStNG
/
5: Repeat process for all four holes and secure with
adjustable wrench.
10