Black Level; Eye Saver Mode; Screen Adjustment; Calibration Report - Samsung Odyssey G9 Series User Manual

Black Level

If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
colour degradation, black level, etc.) may occur, depending on the connected source device.
In such case, Black Level can be used to adjust the image quality.
― This function is only available in
HDMI mode.
• Normal: Select this mode when there is no contrast ratio degradation.
• Low: Select this mode to reduce the black level and increase the white level when there is a contrast
ratio degradation.
―
Black Level may not be compatible with some source devices.
― The
Black Level feature is only activated at a certain
― This menu is not available when
PIP/PBP is enabled.
― Adjust the
Black Level because the image quality may differ depending on the external device.
AV resolution, such as 720P @ 60Hz and 1080P @ 60Hz.

Eye Saver Mode

Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland "Low Blue Light Content" is a certification for products which meet requirements for
lower blue light levels. When Eye Saver Mode
decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the
blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as
it met the requirements of TÜV Rheinland "Low Blue Light Content" standards.

Screen Adjustment

― This option is only available when
PC/AV Mode
― This menu is only available when
Screen Size
When a 480P or 576P or 720P or 1080P signal is input in
Screen Fit to adjust horizontal position and vertical position in 0-6 levels.
― This menu is not available when
PIP/PBP is enabled.
Configuring H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.

Calibration Report

is 'On', the blue light that wavelength is around 400nm will
is set to AV.
is set to Screen Fit in AV Mode.
AV mode and the product can display normally, select
29