Removing/Inserting The Battery; Switching On And Off - Parkside PAAS 20-Li A1 Original Instructions Manual

GB CY
Overview of the LED indicators on
the charger:
Green LED illuminated while battery not
inserted: Charger is ready.
Green LED lights up: Battery is charged.
Red LED lights up: Battery charging.
Red LED fl ashes:Battery overheated
Red + green LEDs fl ash: Battery defective
Note the label on the device itself
for the LED display on the smart
charger.
Removing/inserting the
battery
1. To remove the battery (17) from the
device, press the release button (16) on
the battery (17) and pull it out.
2. To insert the battery (17) into the de-
vice, push the battery along the guides
into the device. You will hear it click
into place.

Switching on and off

Remove the blade guard (1) before
switching on.
The device has a start-up pro-
tection to prevent unintentional
start-up and thus personal injury. Follow
the switch-on procedure described.
The device reacts like a convention-
al pair of secateurs. One cut is
made per start lever movement. As long as
you keep the start lever (10) pressed, the
blade remains closed.
Switching on
1. Ensure that the battery (17) is inserted
(see "Removing/inserting the battery").
12
2. Press the on/off switch (8) to activate
the device.
The device beeps twice and the
green LED (9) lights up continu-
ously.
3. Before the fi rst cut and after changing
the battery, you must operate the start
handle (10) twice within 0.8 seconds.
As soon as the device is activat-
ed, it beeps again. The blade
opens if it was previously closed.
After 30 seconds of non-use, the
device switches to standby mode
for safety reasons. The green LED (9) is
still lit. To use it again, you must oper-
ate the start handle (10) twice again
within 0.8 seconds.
4. The blade closes when and as long as
you press the start lever (10).
Switching off
1. We recommend taking the device out
of operation when it is closed. Press
and hold the and start lever (10) for 5
seconds.
The device beeps twice and the
blade remains closed if you re-
lease the start lever (10) now.
2. Press the on/off switch (8) to deactivate
the device.
The device beeps once and the
green LED (9) goes out.
When not in use, the device auto-
matically switches off completely
after 5 minutes, and the green LED
(9) goes out.